Industrial supply from Canada. Enquiries welcome worldwide +1 437 917 9336Mon to Fri, 7 am to 5 pm ETOrder supportSign in
Industrial Supply and Engineering
Request a quote Shop
Request a quote Call

For transformer makers and service shops

Transformer accessories. The full set from one source.

Protection relays, pressure relief, oil level and temperature indicators, terminal boxes, bushings, conservator aircells and off-circuit tap changers for oil-filled transformers. Matched to your design, or to the part you need to replace.

Oil-filled power transformer with conservator, bushings and accessories
Oil-filled power transformer. Accessories shown are typical of the range we supply.
  • One sourcefor protection, monitoring and connection
  • Made to your designor matched to the part you replace
  • ISO 9001certified manufacturing
  • North Americarequirements confirmed with each order

Where each one sits

Tap a number to see the part.

A typical oil-filled transformer carries eight kinds of accessory. Tap a marker to see what it does and what it looks like.

Drawn oil-filled transformer with its accessories. Tap a marker to see what each one does. 1 2 3 4 5 6 7 8
Buchholz relay

1. Buchholz relay. Sits on the pipe between tank and conservator. Gives an alarm on slow gas build-up and trips on an oil surge.

The range

Everything bolted to the tank, in four groups.

Tell us the transformer type, size and voltage class, and we propose the matching set. Ratings, set points and test reports are confirmed on the quotation for your exact design.

Protection

  • Buchholz relaysGas and surge protection on the pipe between tank and conservator, with alarm and trip contacts.
  • Conservator protection relaysAlarm when the conservator aircell is punctured.
  • Gas collecting devicesTake gas samples from the relay at ground level.
  • Pressure relief devices and valvesSpring-loaded relief with switch contacts, open or shrouded with a drain pipe.

Monitoring

  • Oil level indicatorsMagnetic dial gauges for conservators and sealed tanks, with low and high level switches.
  • Oil and winding temperature indicatorsDial indicators with alarm and trip switches, and remote signal options.
  • Temperature transmitters and digital indicatorsFor SCADA and remote monitoring.
  • Flow indicators and water leakage detectorsFor forced-oil and water-cooled units.

Connection

  • Porcelain bushingsFor distribution and medium voltage classes, with stems and flags to your drawing.
  • CT terminal boxesDie-cast boxes for current transformer leads, terminals replaceable on site.
  • Core and frame earthing boxesFor core and frame ground connections.

Conservator and tap changing

  • AircellsFlexible separators made to your conservator size.
  • Off-circuit tap changersRotary and linear types for pole and pad-mounted distribution transformers.

Who it is for

Two ways buyers use us.

Most North American distribution units are sealed-tank; conservator-type power transformers use the full protection set. We quote both.

Power transformer with conservator and radiators

Transformer makers

A second source for the accessories on every unit you build, quoted as a set per design and repeated on each order.

  • Accessory set per transformer design
  • Samples and test reports for your approval
  • One contact for repeat orders
Distribution transformer with bushings and conservator

Service and rewind shops

A replacement for the accessory that failed, matched from the old part, the nameplate or a photo.

  • Matched to the old part or nameplate
  • Mounting and wiring checked against yours
  • Quoted with a firm delivery date

Built for North America

Confirmed for each order.

Every quotation states how the accessories meet your requirements before you order. We confirm these points with each order:

  • Cold-climate seals and gaskets for outdoor units in Canada
  • Imperial units on gauges and dials where you need them
  • Conduit entries and threads to match your wiring
  • Contact ratings and wiring for your control voltage
  • Test documentation to the standard your customer specifies
  • Paint colour and finish to your specification

How an order works

  1. Send the design or the old partTransformer type, size and voltage class, or a photo of the nameplate and the part.
  2. ProposalWe propose the accessory set and state how each North American point is met.
  3. Samples and approvalSamples and test reports for your engineering approval, where you need them.
  4. Order and deliveryFirm price and delivery on the quotation, then repeat orders to the same set.

Ask for a set, or a replacement.

Tell us what you build or what you need to replace. We reply by email, usually within one business day, with questions or a proposal.

Have a photo of the nameplate or the old part, or a drawing of your design? Attach it to the form, up to 3 files.

Prefer to talk? Call +1 437 917 9336, Monday to Friday, 7 am to 5 pm ET.

What do you need?
Accessories

Up to 3 files, 15 MB each: PDF, photos, DXF, DWG or STEP. Files are stored privately and only PRP can open them.

    We use these details to respond to your request. Do not include passwords or payment details. Read our privacy policy.

    Questions buyers ask.

    Can you match the accessory on a unit we already have in service?

    Usually, yes. Send the make and model from the old part, the transformer nameplate and a photo of the mounting. We confirm the mounting, wiring and switch contacts against yours before quoting.

    Do the accessories meet North American requirements?

    Each quotation states how the accessories meet the requirements you give us, including cold-climate seals, units on dials, conduit entries and the test documentation your customer specifies. These points are confirmed for each order.

    Can we get samples and test reports before we approve a supplier?

    Yes. Ask for samples with the request and we arrange a sample set with its test reports for your approval.

    Do you supply the full set or single items?

    Both. Makers usually order the full set per design; service shops usually order the single part that failed.

    Are prices on this page?

    No. Accessories depend on the transformer design and options, so every quotation is made for your exact set.