Home / Compressor room planner
Size a compressor room from your demand.
Enter your demand and pressure. The planner sizes the compressors, dryer, filters and tanks, and works out the floor space, electrical feed and cooling air.
Your room, sized from the numbers you enter
Compressors, dryer, filters and tanks, with the floor space, electrical feed and cooling air they need. The equipment list and layout notes are below.
Equipment list
| # | Item | Size |
|---|
Why it is laid out this way
A planning layout from typical footprints, not a drawing. It assumes lubricated or oil free rotary screw compressors at about 4.3 cfm per hp at 100 psig, a variable speed trim machine on top of fixed speed base load, typical motor full load amps, 36 in of service space in front of compressors and 1 m in front of electrical gear. We confirm every number on site before anything is ordered.
Want this drawn for your building, with the real equipment, piping and electrical? Send the room dimensions and a photo.
Request a room layoutTurn the plan into a quote.
Send the room size, a photo and your power bill. We will come back with real equipment, a piping layout and the numbers for an incentive application.
- Questions about an online ordersupport@prpreps.ca
- Sales and quotessales@prpreps.ca
- Phone+1 647 717 6264
Sizing methods on this page are developed and checked by a licensed professional engineer in Ontario. Results are planning numbers; we confirm every size against your site before anything is ordered.